Справочник Пользователя для Microsoft Corporation RM-122
12
DRAFT
Replace the battery (7).
Press the back cover into place (8).
■ Charge the battery
Connect the charger to a wall socket. Connect
the charger to the device.
the charger to the device.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.
The charging time depends on the charger and
the battery used. Charging a BP-5M battery
with the AC-4 charger takes approximately
80 minutes.
the battery used. Charging a BP-5M battery
with the AC-4 charger takes approximately
80 minutes.
■ Switch the device on or off
Press and hold the end key.
If the device asks for a PIN code, open the slide, enter the PIN
code, and select
code, and select
OK
.
If the device asks for the lock code, enter the lock code, and
select
select
OK
. The factory setting for the lock code is 12345.