Справочник Пользователя для Microsoft Corporation RM-122
75
DRAFT
Lights
— to set the device lights continuously on while using the enhancement,
select
On
.
Security
Select
Phone and SIM card
,
Certificate management
, or
Security module
.
Phone and SIM card
You can change the following codes: lock code, PIN or UPIN code, and PIN2 code.
These codes can only include the numbers from 0 to 9.
These codes can only include the numbers from 0 to 9.
Avoid using access codes similar to emergency numbers to prevent accidental
dialing of the emergency number.
dialing of the emergency number.
Code in use
— to select the active code,
PIN
or
UPIN
, for the active USIM. This is
shown only if the active USIM supports UPIN, and the UPIN is not rejected.
PIN code request
or
UPIN code request
— to set the device to request the code
each time the device is switched on. Some SIM cards may not allow the PIN code
request to be turned
request to be turned
Off
. If you select
Code in use
>
UPIN
,
UPIN code request
is
shown instead.
PIN code
or
UPIN code
,
PIN2 code
, and
Lock code
— to change the codes
Keypad autolock period
>
User defined
— to automatically lock the keypad after a
defined period of inactivity
Phone autolock period
— to set a time-out after which the device is automatically
locked. To use the device again, you need to enter the correct lock code. To turn off
the autolock period, select
the autolock period, select
None
.
Lock if SIM card changed
— to set the device to prompt for the lock code when an
unknown, new SIM card is inserted into your device. The device keeps a list of SIM
cards that are recognized as the owner cards.
cards that are recognized as the owner cards.
Closed user group
(network service) — to specify a group of people whom you can
call and who can call you. For more information, contact your service provider. To
activate the default group agreed on with the service provider, select
activate the default group agreed on with the service provider, select
Default
. If
you want to use another group (you need to know the group index number), select
On
.
When calls are limited to closed user groups, calls may be possible to the official emergency
number programmed into your device.
number programmed into your device.
Confirm SIM services
(network service) — to set the device to display confirmation
messages when you use a SIM card service
Certificate management