Справочник Пользователя для Microsoft Corporation RM-122

DRAFT

period, select 

. For security reasons it is advisable to use the 

 

setting whenever possible.

 — to define a name for your device.

> 

 — to enable the usage of the SIM card of the device by 

another device (for example, a car kit) by Bluetooth technology (SIM access 
profile)

When the wireless device is in the remote SIM mode, you can only use a compatible 
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will 
not make any calls, except to the emergency numbers programmed into your device, while in 
this mode. To make calls from your device, you must first leave the remote SIM mode. If the 
device has been locked, enter the lock code to unlock it first.

There can be only one active Bluetooth connection at a time.

1. Open an application where the item you wish to send is stored.

2. Scroll to the item you want to send, and select 

> 

> 

.

The device starts to search for devices within range. Paired devices are shown 
with .

When searching for devices, some devices may show only the unique device 
addresses. To find out the unique address of your device, enter the code 
*#2820# in the standby mode.

If you have searched for devices earlier, a list of the devices that were found 
previously is shown first. To start a new search, select 

. If you 

switch off the device, the list of devices is cleared, and the device search needs 
to be started again before sending data.

3. Select the device with which you want to connect.

4. Pairing

• If the other device requires pairing before data can be transmitted, a tone 

sounds and you are asked to enter a passcode.

• Create your own passcode (1–16 digits) and agree with the owner of the 

other device to use the same code. You do not have to memorize the 
passcode.

• After pairing, the device is saved to the 

 view.

When the connection has been successfully established, 

 is displayed.