Справочник Пользователя для RF Ideas Inc LC80XW6
©2015 RF IDeas
Configuration Utility User Manual
P a g e
|
35
3.4 Icon Toolbar
Image 39: Icon Toolbar
The Icon Tool Bar contains the three most general configuration controls for the utility. These controls
are also found in the Menu Toolbar under Connect (for connect and disconnect) and Device (for write
settings and write active).
are also found in the Menu Toolbar under Connect (for connect and disconnect) and Device (for write
settings and write active).
Connect
Image 40: Connect Button
Clicking the Connect icon button commands the utility to search for a device through all available port
connections.
connections.
Once the utility detects a device connection, the Device List pull-down menu in the Standard
Configuration Area displays the interface connection, firmware, and LUID information for the connected
device. The model number of the device will be displayed below the Device List pull-down and the
Output Test Area will turn from gray to green (Image 24).
Configuration Area displays the interface connection, firmware, and LUID information for the connected
device. The model number of the device will be displayed below the Device List pull-down and the
Output Test Area will turn from gray to green (Image 24).
More than one device can be connected simultaneously to the utility. To switch between devices,
select the desired connected device from the Device List pull-down menu.
select the desired connected device from the Device List pull-down menu.