Справочник Пользователя для Satel Oy SATEL-TA31

SATELLINE-M3-TR8

SATELLINE-M3-TR9

Integration Guide, Version 1.7

RadioProperty

SL%E=x

Set Error check and Full CRC16 check
modes. Value of x is:
"0" Error check off
"1" CRC8 Partial

"2" CRC8 Full
"3" CRC16 Full

“OK" or "ERROR"

RadioProperty

SL%R?

Get region code setting/status

0,0 = Default, 1,1 = US, 1,2
= US & Illegal radio setting
combination (TX is disabled)

RadioProperty

SL@D?

Get Tx delay (ms)

For example "0 ms" or "50
ms"

RadioProperty

SL@D=n

Set Tx delay (ms), n is [0…65535]

"OK" or "ERROR"

RadioProperty

SL@E?

Get supported radio compatibility
modes.

List of numbers, separated by
commas, showing the
supported modes:
0=SATELLINE-3AS.

RadioProperty

SL@F?

Get noise level of radio channel

”-xxx dBm"

RadioProperty

SL@M?

Get repeater function

"O" = Repeater

OFF(character O)
"R" = Repeater ON

RadioProperty

SL@M=x

Set repeater function. Values of x are:
"O" = Repeater function OFF
(character O)
"R" = Repeater function ON

“OK" or "ERROR"

RadioProperty

SL@P?

Get transmitter output power

One of these values “10mW,
“20mW”, “50mW”,
"100mW", "200mW",
"500mW"

RadioProperty

SL@P=nnnnn

Set RF output power (mW)
Valid values for nnnnn:
"10" for 10 mW TX power.
"20" for 20 mW TX power.

"50" for 50 mW TX power.
"100" for 100 mW TX power.
"200" for 200 mW TX power.
"500" for 500 mW TX power.

"OK" or "ERROR"

RadioProperty

SL@R?

Get RSSI (Received Signal Strength
Indication) of last received message
(dBm)

”-nnn dBm”, nnn is a decimal
value of field strength
between –80 dBm and –118
dBm.
Value is available 7 s after
reception, after that the
response is "<-118 dBm".

RadioProperty

SL@S?

Get radio compatibility mode

"0" = SATELLINE-3AS

RadioProperty

SL@S=x

Set radio compatibility mode. Value of
x is:
0 = SATELLINE-3AS

“OK" or "ERROR"

Reset

SL@X=n

Reset command. Values of n are:
"9" Reset modem

“OK" or "ERROR", then
modem resets required

blocks.