Справочник Пользователя для CyberTAN Technology Inc. WR114

Broadband Wireless Router User Guide

 

- 29 - 

29

input. 

DHCP Release: Click this button to eliminate the IP address obtained from 
the DHCP server. 

DHCP Renew: Click this button to refresh the IP address from the

 

DHCP 

server. 

Note that the “DHCP Release” and “DHCP Renew” button only show up 
when you select “Get IP Address Automatically” in the OnePage Setup. 

 Intranet This section displays the current “Private IP Address” and 

“Subnet Mask” of the router, as seen by users of your internal network. 

 DHCP Clients Table If the router is setup to act as a DHCP server, the LAN 

side IP Address distribution table will appear by clicking this button. 

 
4-8 Dynamic Routing 

The Dynamic Routing feature allows your Broadband Wireless Router to exchange 
routing information with other routers in the network. Enabling this feature is likely to 
enhance performance of your Broadband Wireless Router. 

 

 

 TX From the drop-down list, select one of the routing information types, 

“RIP-1”, “RIP-1 Compatible”, or “RIP-2”, to enable the “TX” (transmit) 
function. “RIP-1” is the protocol used by older routers. Newer routers 
should use “RIP-2” or “RIP-1 Compatible” servers to broadcast RIP-1 
and multicast RIP-2. 

 RX From the drop-down list, select one of the routing information types, 

“RIP-1” or “RIP-2”, to enable the “RX” (receive) function. 

Click “Apply” after making any changes. 

 
4-9 Static Routing 

The Static Routing feature allows PCs that are connected to the Broadband Wireless 
Router, either directly or through a hub/switch (in the immediate LAN), to 
communicate with other PCs in the respective LAN segment which are connected to 
the Broadband Wireless Router through another router (destination LAN). Up to 20