Справочник Пользователя для Lifetrons International Limited FG-1060N
• Exclusive protective storage case included
Specifications
• Battery: Korean-made Lithium-ion, 5200mAh
• USB port: 5VDC, 2.1A output, USB 2.0 storage sharing
• Network standard: IEEE 802.11b/g/n (up to 150Mbps)
• Power supply: Recharge via USB port
• Charging time: 6-8 hours using a 5W or 10.5W AC charger
• LED indicator: 5 level dual-color LED display
• Dimensions: 103 x 46 x 29mm
• Weight: 144g
How to Use
A. Recharging the Power Solution Wi-Fi Router & Charger
The charger has already been partially charged and is ready for use directly after
purchase. From time to time, your portable device may completely consume the
purchase. From time to time, your portable device may completely consume the
charger’s power. When there is no LED power, the charger needs to be recharged.
Please recharge it before you use it again.
Please recharge it before you use it again.
1. Connect part (micro-USB jack) to part (micro-USB port).
2. Connect part (USB jack) to a USB port with a power supply (i.e. AC adaptor with USB
power supply).
3. Do not disconnect the charger before the charging cycle is completed.
2. Connect part (USB jack) to a USB port with a power supply (i.e. AC adaptor with USB
power supply).
3. Do not disconnect the charger before the charging cycle is completed.
4. A white LED light will _ash on the charger to indicate the charging process. The LED
changes from rolling to solid white when the charger is fully charged.
B. Recharging your Portable Devices
changes from rolling to solid white when the charger is fully charged.
B. Recharging your Portable Devices
When your portable devices are running out of battery power, you can recharge them
with the charger anytime, anywhere without AC power supply.
with the charger anytime, anywhere without AC power supply.
Note: To prevent overheating, this charger is equipped with built-in safety control,
protecting it from over-heating while charging your device. If it becomes too hot, it will
temporarily shut down. The charger will restart after it has cooled down.
protecting it from over-heating while charging your device. If it becomes too hot, it will
temporarily shut down. The charger will restart after it has cooled down.
1. Connect part ➋ (USB jack) directly to part ➌ (USB port) of the charger.
2. Connect part ➊ (micro-USB jack) into the portable device you wish to charge.
3. Press part ➎ ("CHECK/START” button) of the charger to start charging.
4. When no LED lights show up, the device is out of power. If you would like to use the
charger again, please recharge it by following the steps in part A.
charger again, please recharge it by following the steps in part A.
C. 'LifetronsAir' Software/App Installation and Pairing