Справочник Пользователя для Harsper Co. Ltd. HP-425B
26
Setting the Channel
OWNER'S MANUAL
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC).
source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC).
Press Menu/Set button to display the main OSD menu.
Select the TV main menu item.
Press Menu/Set button to enter the sub menu.
Select Channel Type and press VOL+ button to enter
the
the
¦ parts. Then the cursor moves into the ¦
parts.
Select the Channel Type with CH+/CH- button and press
Back button. You can select NTSC (AIR, CATV, IRC, HRC)
or PAL (AIR, CATV).
Back button. You can select NTSC (AIR, CATV, IRC, HRC)
or PAL (AIR, CATV).
Press Menu/Set button to display the main OSD menu.
Select the TV main menu.
Press Menu/Set button to enter the sub menu.
Select Auto Scan with CH+/CH- button and press
Menu/Set button on the remote control.
Then the tuning bar will appear and scanning will start.
Menu/Set button on the remote control.
Then the tuning bar will appear and scanning will start.
Auto Scan UHF
16
Choosing the Channel Type
Storing the Channel Automatically
1
2
3
4
5
1
2
3
4
• You can enter the TV menu in TV mode only.
(When you watch a TV channel.)
• PAL means PAL-M in channel type.
• PAM-M (AIR, CATV) is used in brazil.
NTSC
PAL
¦CATV
Channel Type
Auto Scan
Fine Tune
CH
¦ NTSC - CATV
¦CATV 5
Channel Type
Auto Scan
Fine Tune
CH
¦ NTSC - CATV
¦CATV 5