Справочник Пользователя для Darfon Electronics Corp M333

Step 3: Have a paper clip, pen, toothpick or other pointed object ready. 

Step 4: To begin activation, first press the Connect button on the receiver. Use a 

pointed object to press the Connect button located on the bottom of the mouse 

within 10 seconds. 

 

 

NOTE: 
‧The receiver may not function properly if placed on or near a metal surface. 
‧If the mouse do not activate, please repeat Step 4. 
‧It is necessary to repeat Step 4 after any loss of power from battery replacement. 

 

3. Power-saving Modes for Mouse: 
‧If not manually powered OFF, the mouse will go into automatic sleep mode when 

not used for 6-10 minutes. 

‧Push the Power switch on the mouse to the OFF position. 

 

If you experience problems setting up your Wireless Optical Mouse, please check the 

following: 

1. Check that the batteries are loaded correctly and have charge in them. 

2. Check that the battery cover is properly secured. 

3. Check that the wireless receiver is connected to your computer correctly. 

4. Please make sure the wireless mouse and receiver have been activated as described 

in Section 2-Installing and Activating the Mouse.   

5. Be sure that the optical mouse is not being used on metallic or glass surfaces as the 

optical sensor may not function correctly. 

6. Please make sure that the receiver is installed at least 20cm (8 inches) away from 

other electronic devices (such as monitors or speakers) and no more than 100cm 

(3.3 feet) away from where the mouse will be used. 

 

5. Warranty Information 
‧One year parts/labor from the date of purchase.   
‧Please refer to the Warranty Terms and Conditions for your local region for further   

warranty details.