Справочник Пользователя для Pelican Accessories BLDS02
Directions
1. Make sure your Xbox® is turned off.
2. Remove the battery lid and place 2 AA batteries into
the 2.4 Street Wireless controller. Make sure the batteries
are inserted as shown in the battery compartment.
the 2.4 Street Wireless controller. Make sure the batteries
are inserted as shown in the battery compartment.
3. Insert the receiver into the Xbox® controller slot of
your choice and power up the Blade Street and then your
Xbox®.
your choice and power up the Blade Street and then your
Xbox®.
Note: Press the Connect button on the Receiver
once (Signal LED will FLASH slowly). Then press the
Back button on controller. This programs the Receiver to
connect to that Controller every time it is used. This oper-
ation can be done again and again to connect to multiple
controllers.
Back button on controller. This programs the Receiver to
connect to that Controller every time it is used. This oper-
ation can be done again and again to connect to multiple
controllers.
4. Alternatively, if any problems should occur during play
(due to low batteries, receiver disconnection from the
system,etc.) you can turn the controller off and then on,
check the control, and if you still do not have signal,
press the connect button on the receiver, wait three
seconds and then press the Back button.
(due to low batteries, receiver disconnection from the
system,etc.) you can turn the controller off and then on,
check the control, and if you still do not have signal,
press the connect button on the receiver, wait three
seconds and then press the Back button.
Note: If you are using more than one 2.4 Street
controller, simply repeat the above steps and it should
connect exactly the same way on an available channel.
controller, simply repeat the above steps and it should
connect exactly the same way on an available channel.
5. Insert a game into your Xbox®..
6. You are now ready to play.
9