Справочник Пользователя для Sierra Wireless Q2438F
WM_HWD_SK_UGD_002 - 002
6/27/2003
2 Product Description
The Wavecom Starter Kit includes the following:
Interface Board
The Interface Board provides a working platform for testing and evaluating the
performance of the Module, as well as allowing customer design of host
software interfaces.
Module
One Wavecom module is included with the Starter Kit and comes pre-
assembled on the Interface Board. The Module is soldered down via its four
Ground contact pins, and is also mated to the 60 pin board-to-board connector
of the Interface Board.
of the Interface Board.
Handset
The Handset contains a standard telephony earpiece and microphone,
providing a full audio interface to the Module through the Interface Board
connectors.
Serial Cable
The Serial Cable connects the Interface Board to the controlling PC.
Antenna and RF Adapter
The Antenna provides sufficient omni-directional gain to allow the module to
go over the air on the network. An Antenna Adapter is provided to allow the
Antenna Cable to connect to the RF Connector of the Module.
Power Adapter
The included Power Adapter allows for use of the Starter Kit without the need
for a lab power supply. The Adapter can source enough current to support
CDMA, GSM, and GPRS modules at full transmit power, as well as the
operation of the Interface Board. Some Kits may include a lab power supply
cable instead of, or in addition to, the Power Adapter.
confidential ©
Page :
5 / 17
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.