Справочник Пользователя для Symbol Technologies CS4070
Quick Reference Guide
7
To pair to a Bluetooth-enabled host:
1. Press the scan button (+) to wake the
1. Press the scan button (+) to wake the
scanner.
2. Press and hold the Bluetooth button for
five seconds. The scanner beeps and the
Bluetooth button starts blinking quickly to
indicate that the scanner is discoverable
by the host.
Bluetooth button starts blinking quickly to
indicate that the scanner is discoverable
by the host.
3. On the host, launch the Bluetooth pairing
application and place the application into
discover Bluetooth device mode. Refer to
the CS4070 Scanner Product Reference
Guide for pairing examples.
discover Bluetooth device mode. Refer to
the CS4070 Scanner Product Reference
Guide for pairing examples.
4. Select the CS4070 from the discovered
device list. The Bluetooth application may
prompt you to scan a PIN it generated, or
for you to create and then scan the PIN.
prompt you to scan a PIN it generated, or
for you to create and then scan the PIN.
that
correspond to the PIN, then scan
The Bluetooth button blinks slowly to indicate
that the scanner paired with the host.
that the scanner paired with the host.
Unpairing
To unpair the scanner and host, press the
Bluetooth button. Upon unpairing, the
Bluetooth button stops blinking.
Bluetooth button. Upon unpairing, the
Bluetooth button stops blinking.
Note Bluetooth pairing suspends
temporarily while charging via a
USB cable. Disconnecting the cable
re-establishes Bluetooth pairing.
USB cable. Disconnecting the cable
re-establishes Bluetooth pairing.
Note To enter batch scanning mode, the
scanner cannot be paired to a
Bluetooth host.
Bluetooth host.