Справочник Пользователя для Symbol Technologies PDT8138

Section 2: Installing the PCS Connection Card

䊳

Align the infrared port on your Handheld PC with an 
infrared port on your host PC. 

ActiveSync should launch automatically when the host and 
Handheld/Pocket PC are connected.

If you are unable to establish a connection, launch ActiveSync from 

the Start menu and use the online help in ActiveSync. 

If you are prompted to indicate whether you want to set 
up a partnership, click Yes or No and click Next. (For the 
purpose of downloading the PCS Connection Manager 
Software, it does not matter whether you have a 
partnership.) You should then be prompted that there is 
software to download.

Click Yes to start the download. When complete, you will 
be prompted to check your mobile device screen to see if 
additional steps are required.

Click OK.

Reset your Handheld/Pocket PC by inserting the stylus 
into the reset button. (The reset button is usually a 
circular indentation that may be on the keyboard of the 
Handheld PC or the bottom of the Pocket PC. Consult the 
documentation that came with your PC if you do not 
know how to reset the device.)

On completion of this step, the PCS Connection Manager 
Software and the PCS Connection Card driver are installed 
and you can proceed to activate your card. See “Activating 
Your PCS Connection Card” on page 29.

To insert the PCS Connection Card into a Pocket PC:

If the PCMCIA jacket accessory is not already attached, 
slide the Pocket PC bottom first into the jacket. It should 
click into place.

Attach the antenna to the circular copper connector on 
the end of the card. DO NOT FORCE.