Справочник Пользователя для Inovonics Wireless Corporation 3B6ETPMT
Note:
Ensure cabling enters the housing through the access
wiring thru-hole, and replace the housing (Figure 2).
Figure 3
Mount the Transmitter
2.4 Register the Transmitter
Note:
See “Programming the PMT-Meter Pair” in TapWatch User
Manual for more information.
1.
Confirm that transmitter is connected to the meter.
2.
Confirm that the battery is installed.
3.
Go to the “Registered Meters” tab of the Site Information
editor.
4.
4.
Click “Add” on the “Registered Meters” page; confirm selected
building.
5.
5.
Complete the “Add New Meter To...” form when it appears.
6.
Click the “Register” button.
7.
When prompted, press the reset button on the transmitter;
wait for confirmation.
3 Replace the Battery (ES1501 Only)
When the low battery message is received, you will need to
replace the ES1501 battery.
1.
replace the ES1501 battery.
1.
Open the housing by pressing down on the base tab near the
wiring thru-hole while lifting away the cover.
2.
2.
Remove the old battery, taking note of the battery
orientation.
3.
3.
Insert the new battery, making sure it is aligned correctly.
4.
Press the reset button.
Note:
ES1501 transmitters retain programming data in non-
volatile memory. They do not require reprogramming after loss of
power. Install new battery and press the transmitter reset button
to re-initialize the transmitter and restore programming. Its
count will go to zero and the initial Meter Read count will be
updated in the DCC.
power. Install new battery and press the transmitter reset button
to re-initialize the transmitter and restore programming. Its
count will go to zero and the initial Meter Read count will be
updated in the DCC.
4 Specifications
Dimensions:
3.57" x 1.70" x 0.85"
Operating environment:
0°- 60°C (32°- 140°F), 90% relative
humidity, non-condensing
Typical battery life:
ES1501: 5 years at 70 to 90°F (20 to
30°C). Higher temperatures reduce battery life. EN1501-XL:
calculated battery life of 20 years at 70 to 90°F (20 to 30°C).
Higher temperatures reduce battery life.
calculated battery life of 20 years at 70 to 90°F (20 to 30°C).
Higher temperatures reduce battery life.
ES1501 Battery (BAT604):
3.0V lithium (DL123A) The battery
is always supervised.
5 Warranty/Disclaimer
Caution:
Changes or modifications to this unit not expressly
approved by Inovonics Wireless Corporation may void the
installer's authority to operate the equipment as well as the
product warranty.
installer's authority to operate the equipment as well as the
product warranty.
Inovonics Wireless Corporation (“Inovonics”) warrants its
products (“Product” or “Products”) to conform to its own
specifications and to be free of defects in materials and
workmanship under normal use for a period of fourteen (14)
months from the date of manufacture. Within the warranty
period, Inovonics will repair or replace, at its option, all or any
part of the warranted Product. Inovonics will not be responsible
for dismantling and/or reinstallation charges. To exercise the
warranty, the User (“User”, “Installer” or “Consumer”) must work
directly through their authorized distributor who will be given a
Return Material Authorization (“RMA”) number by Inovonics.
Details of shipment will be arranged directly through the
authorized distributor.
This warranty is void in cases of improper installation, misuse,
failure to follow installation and operating instructions,
alteration, accident or tampering, and repair by anyone other
than Inovonics.
This warranty is exclusive and expressly in lieu of all other
warranties, obligations or liabilities, whether written, oral,
express, or implied. There is no warranty by Inovonics that
Inovonics product will be merchantable or fit for any particular
purpose, nor is there any other warranty, expressed or implied,
except as such is expressly set forth herein. In no event shall
Inovonics be liable for an incidental, consequential, indirect,
special, or exemplary damages, including but not limited to loss
of profit, revenue, or contract, loss of use, cost of down time, or
interruption of business, nor any claim made by distributor's
customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does
not authorize any person to act on its behalf to modify or
extend this warranty.
This warranty will apply only to Inovonics Products. Inovonics
will not be liable for any direct, incidental, or consequential
damage or loss whatsoever, caused by the malfunction of
Product due to products, accessories, or attachments of other
manufacturers, including batteries, used in conjunction with
Inovonics Products.
products (“Product” or “Products”) to conform to its own
specifications and to be free of defects in materials and
workmanship under normal use for a period of fourteen (14)
months from the date of manufacture. Within the warranty
period, Inovonics will repair or replace, at its option, all or any
part of the warranted Product. Inovonics will not be responsible
for dismantling and/or reinstallation charges. To exercise the
warranty, the User (“User”, “Installer” or “Consumer”) must work
directly through their authorized distributor who will be given a
Return Material Authorization (“RMA”) number by Inovonics.
Details of shipment will be arranged directly through the
authorized distributor.
This warranty is void in cases of improper installation, misuse,
failure to follow installation and operating instructions,
alteration, accident or tampering, and repair by anyone other
than Inovonics.
This warranty is exclusive and expressly in lieu of all other
warranties, obligations or liabilities, whether written, oral,
express, or implied. There is no warranty by Inovonics that
Inovonics product will be merchantable or fit for any particular
purpose, nor is there any other warranty, expressed or implied,
except as such is expressly set forth herein. In no event shall
Inovonics be liable for an incidental, consequential, indirect,
special, or exemplary damages, including but not limited to loss
of profit, revenue, or contract, loss of use, cost of down time, or
interruption of business, nor any claim made by distributor's
customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does
not authorize any person to act on its behalf to modify or
extend this warranty.
This warranty will apply only to Inovonics Products. Inovonics
will not be liable for any direct, incidental, or consequential
damage or loss whatsoever, caused by the malfunction of
Product due to products, accessories, or attachments of other
manufacturers, including batteries, used in conjunction with
Inovonics Products.
Note:
E-mail support@inovonics.com for a copy of the CE
Declaration of Conformity.
A.
Anchor installed in wall
B.
Double-sided tape
C.
Mounting screw
A
B
C