Справочник Пользователя для Honeywell International Inc. CS19A

6 - 5

ASCII code, and xx stands for the insert character’s hex value for its 
ASCII code.  
Refer to the 

decimal, hex and character codes.

E9 Include in the output message all but the last “nn” characters, starting 

from the current cursor position.  The cursor is moved forward to one 
position past the last input message character included.  

Syntax = E9nn 

where nn stands for the numeric value (00-99) for the number of 
characters that will not be sent at the end of the message.   

F4 Send “xx” character “nn” times in the output message, leaving the 

cursor in the current position.  

Syntax = F4xxnn where xx stands for the 

insert character’s hex value for its ASCII code, and nn is the numeric 
value (00-99) for the number of times it should be sent.  

Refer to the 

decimal, hex and character codes.

B3 Insert the name of the bar code’s symbology in the output message, 

without moving the cursor.  Only symbologies with a Honeywell ID are 
included (see 

decimal, hex and character codes.

B4 Insert the bar code’s length in the output message, without moving the 

cursor.  The length is expressed as a numeric string and does not 
include leading zeroes.

F5 Move the cursor ahead “nn” characters from current cursor position.  

Syntax = F5nn  where nn is the numeric value (00-99) for the number 

of characters the cursor should be moved ahead.  

F6 Move the cursor back “nn” characters from current cursor position.  

Syntax = F6nn  where nn is the numeric value (00-99) for the number 

of characters the cursor should be moved back. 

F7 Move the cursor to the first character in the input message.  

Syntax = 

F7.

Preliminary Draft