Справочник Пользователя для Honeywell International Inc. IM11PRT

The module mounts on a PC board and connects to it using a mini-
PCI connector, P/N JAE MM60-52B1-E1 or equivalent. Intermec 
recommends using the higher profile connector, because the low 
profile connector does not fit flush to the PCB with the low profile 
connection.

The antenna receptacle is a Hirose U.FL connector (50 ohm, coaxial).

The module has been tested to work with a variety of antenna types. 
Antenna systems, combination antenna and cables, are restricted to 
+6 dBi linear gain in North, Central, and South America. Europe have 
a maximum antenna system gain restriction of 2 Watt effective 
radiated power. 

Radio communications regulatory agencies in each country has 
restrictions for antenna gain or transmitter power. Consult with your 
Intermec OEM Sales Representative or Professional Wireless /RFID 
Installer for details.

These antennas are approved to work with the IM11: 

Antenna primary linear (0 dBi linear, omni)

PIFA omni yagi (5.5 dBi linear)

Ceramic patch antenna (2.5 dBi, circular polarized)

Cross polar linear (dual pole antenna)

High gain circular polarized panel 11 dBiC (8 dBi linear)

High gain linear panel (8 dBi)

RFID printer coupler (-30 dBi)

NeWave N7 (5.5 dBi, multi axis dipole)

You can use any antenna with similar construction to one of the 
approved antennas, as long as it has equal or less gain. The module 
integrator is responsible for final regulatory approvals.

Note: To use the 8 dBi antennas, the module integrator needs to 
reduce the output power to 29 dBm.