Справочник Пользователя для Honeywell International Inc. 950009

The terminal houses a compact image engine that instantly reads all popular 1D and 2D bar codes. It also supports omni-
directional aiming and decoding for greater flexibility in handling the device in real-world settings. The imager can also capture 
digital images, such as signatures and pictures of damaged inventory. Images are saved in industry-standard file formats.

The terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area 
imaging and Advanced Linear Decoding (ALD).

Full-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and 
picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from most any position. 
To achieve the best read, the aiming beam should be centered horizontally across the bar code. 

ALD provides fast reading of linear and stacked linear bar codes. To achieve a positive read when reading linear 1D and PDF417 
bar codes, the green aiming beam should be centered horizontally across the bar code. When ALD is enabled, the reader does 
not read matrix or postal codes.

1. Point the Dolphin 9500/9550 terminal directly at the bar code. The imager faces straight out the top panel. The aiming beam 

should be oriented in line with the bar code to achieve optimal decoding. A range of 4-10 inches (10-25 cm) from the bar 
code is recommended. 

2. Project the imager’s green aiming beam by:

•

Pressing and holding the SCAN key on both the 9500 and 9550. 

•

Pressing and holding the Scan Trigger on the 9550.

3. The decode LED flashes red, and the scan LED lights red. 

4. Center the aiming beam over the bar code.

5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.

6. The bar code information is entered into the application in use.

DOLPHIN 9500

Scan LED

Decode LED