Справочник Пользователя для Adtran TRC4205
TRACER 4205 System Manual
Section 5, User Interface Guide
612804205L1-1A
© 2002 ADTRAN, Inc.
39
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system.
and to configure the system.
Moving through the Menus
Session Management Keystrokes
2.
TERMINAL MENU AND SYSTEM CONTROL
Password Protection
The TRACER 4205 provides optional password protection of the terminal interface. If enabled, a password
prompt is presented at power-up, reboot, modem logout, or after ten minutes of inactivity on the terminal.
Password protection is enabled and a password is defined via the system configuration menu.
prompt is presented at power-up, reboot, modem logout, or after ten minutes of inactivity on the terminal.
Password protection is enabled and a password is defined via the system configuration menu.
If the password is forgotten, physical access to the TRACER 4205 unit is required to access the terminal
interface. The password may be bypassed by pressing the
interface. The password may be bypassed by pressing the
DS3 LBK
button while the system is rebooted.
This disabled the password and will initialize the TRACER 4205 system status menu to allow the
password to be changed (via the configuration screen).
password to be changed (via the configuration screen).
To do this...
Press this key...
Move up to select items
Up Arrow
Move down to select items
Down Arrow
Edit a selected menu item
Enter
Scroll through configuration parameters for a menu item
Spacebar
Left/Right Arrows
P or N (Prev/Next)
Cancel an edit
Escape
Return to Main Menu page
M
To do this...
Press this key...
Log into a session
Spacebar
Refresh the screen
To save time, only the portion of the screen that has changed is refreshed. This
option should only be necessary if the display picks up incorrect characters
To save time, only the portion of the screen that has changed is refreshed. This
option should only be necessary if the display picks up incorrect characters
<Ctrl + L>
All TRACER 4205 systems are shipped factory default with password protection disabled.
Rebooting the unit to bypass password protection and redefine the installed password is
service affecting.
service affecting.