Справочник Пользователя для Xmark Corporation WKP
EXI ECO-Lite User Manual
980-000004-000
EXI Wireless Systems
10
May 2000
Revision
1.0
10. Password Management
There are two types of passwords: Master password and User password. Master password is used to assign
or delete User password. User passwords are used to bypass the system.
There is only one Master password and 2 user passwords. All passwords are 4 digit numbers.
or delete User password. User passwords are used to bypass the system.
There is only one Master password and 2 user passwords. All passwords are 4 digit numbers.
10.1. Master Password
This password is used to change or delete User password or to change itself (Master password).
To change Master Password:
To change Master Password:
1. Enter existing Master password
2. Press ‘ENTER’ key
3. Enter existing Master password again
4. Press ‘ENTER’ key
5. Enter new 4 digit Master password (not less then 4 digits)
6. Press ‘ENTER’ key
7. After this the keypad Bypass light will flash 3 times and Controller buzzer will beep 4 times to
indicate that new Master password is accepted by both, the Keypad and the Controller.
2. Press ‘ENTER’ key
3. Enter existing Master password again
4. Press ‘ENTER’ key
5. Enter new 4 digit Master password (not less then 4 digits)
6. Press ‘ENTER’ key
7. After this the keypad Bypass light will flash 3 times and Controller buzzer will beep 4 times to
indicate that new Master password is accepted by both, the Keypad and the Controller.
10.2. User password
This password is used to bypass the system and to silence the alarms.
To change/add User password:
To change/add User password:
1. Enter Master Password
2. Press ‘ENTER’ key
3. Enter password slot number (1 or 2)
4. Press ‘ENTER’ key
5. Enter new 4 digit User password (not less then 4 digits)
6. Press ‘ENTER’ key
2. Press ‘ENTER’ key
3. Enter password slot number (1 or 2)
4. Press ‘ENTER’ key
5. Enter new 4 digit User password (not less then 4 digits)
6. Press ‘ENTER’ key
After this the keypad Bypass light will flash 3 times and Controller buzzer will beep 2 times to indicate that
new User password is accepted by both, the Keypad and the Controller.
To delete User Password:
1. Enter Master Password
2. Press ‘ENTER’ key
3. Enter password slot number (1 or 2)
4. Press ‘ENTER’ key
5. Press ‘CLEAR’ key
2. Press ‘ENTER’ key
3. Enter password slot number (1 or 2)
4. Press ‘ENTER’ key
5. Press ‘CLEAR’ key
After this the keypad Bypass light will flash 3 times and Controller buzzer will beep 1 long beep indicate
that one of the User passwords is deleted by both, the Keypad and the Controller.