Справочник Пользователя для Rohde & Schwarz Inc SLV8000
Chapter 5
Operating
2100.4400.32
- 5.98 -
E-2
11.3
System Setup > SNMP Submenu
The operating software of the transmitter has an agent. This agent can communicate with
a remote management station that is used for monitoring and remote control via SNMP pro-
tocol. The agent is configured in the menu windows of the System Setup > SNMP menu.
a remote management station that is used for monitoring and remote control via SNMP pro-
tocol. The agent is configured in the menu windows of the System Setup > SNMP menu.
Menu windows
The SNMP menu branches to the following menu windows:
Setting item
Explanation
Protocol Type
Used to select the protocol type for external communication
– OFF: Communication is deactivated
– Bitbus: BitBus protocol is activated
– I20x: I20x protocol is activated (via serial interface only)
– Bitbus: BitBus protocol is activated
– I20x: I20x protocol is activated (via serial interface only)
Port Type
Used to select the port type
– TCP: Ethernet remote interface
– RS-232-C: D-Sub interface
– RS-485: D-Sub interface
– RS-232-C: D-Sub interface
– RS-485: D-Sub interface
Port
Used to select the logical port number for the BitBus communication via
Ethernet
Ethernet
Baudrate
Used to set the transmission rate for port type RS-232-C or RS-485
I20x Address
Used to configure the protocol address to Exciter A or Exciter B for port
type RS-232-C or RS-485
type RS-232-C or RS-485
Checksum
Used to switch CRC-secured transmission on/off
The same setting must be made for the recipient of the messages.
Display
Explanation
Connected
ON: Indicates that a connection to the called station exists
Context menu
Explanation
Reconnect
This function is used to set up the connection again after changes have
been made to the settings
been made to the settings