Справочник Пользователя для Rohde & Schwarz Inc SLV8000

2100.4400.32

- 2.4 -

E-3

The transmitter consists of the following modules and components:



ADTV coder with 
– Control unit
– Display and keyboard interfaces
– Instrument interfaces
– Slot for CompactFlash memory card



RF board with amplifier control unit



Amplifier with 2, 5, 10, 25, 50 or 100 W DVB power output (depending on the variant)



Front panel: White-on-blue display, 200 x 48 pixels



Power supply unit



Fan

Only the modules or components relevant to the user are described below.

The connectors are all on the rear panel of the instrument (with the exception of the RF
monitoring socket). The connectors listed here depend on the hardware variant (DTV or
ADTV) and hardware options that may be installed (e.g. GPS).

X7

POWER OUT

N female

RF output

X21

TS 1

BNC, female, 75 



Transport stream input 1 (main signal; 
with hierarchy: HP stream)

X22

TS 2

BNC, female, 75 



Transport stream signal 2 (standby sig-
nal; with hierarchy: LP stream)

X23

EXT 1 PPS

BNC, female, 50 



Input for seconds pulse from external 
reference

X24

EXT REF

BNC, female, 50 



Reference input, 5 MHz or 10 MHz, 
-5 dBm to 20 dBm or TTL

X29

REF OUT

BNC, female, 50 



Monitoring output for internal 
1 PPS or 10 MHz signal

X30

ETHERNET 
LOCAL

RJ45, female

Connection of a PC for local operation; 
preset address at X30:
– IP address: 192.168.57.253
– Subnet mask: 255.255.255.0