Справочник Пользователя для Quanta Computer Inc KMP6J1S1

Your phone is powered by a rechargeable battery. A new phone battery must be fully charged before using your phone the first

time.

Before trying to use your phone, insert the phone's battery. Place the battery terminal end towards the hinge of the phone.

Lower the battery toward the phone to lock into place (see right).

Connect the NEC battery charger supplied with your phone to a suitable main power socket.

Connect the charger plug into the connector at the base side of the phone (see right).

Check that the charging battery icon is displayed and the LED glows red. Leave the phone charging until the LED goes out

to fully charge the battery.

The battery charge indicator shows the approximate charge level of the battery while the phone is in use and not being charged.

Check the icon at the top left corner of the screen.

The blocks on the display show the charge of your battery pack..

Full battery power 
Partial battery power 

 

Low battery power 

Battery empty1 (red) 

Battery empty2 (red) 

When the battery voltage falls below the working level, “Recharge battery” is displayed on screen along with an empty battery icon.

While displaying the recharge notification, the phone also sounds a short tone. Once the recharge message is displayed and the

short tone sounds, the phone battery has approximately one minute of use remaining. The phone automatically powers off.

 other external DC source if 

 phone's battery is not 

Charger Connecter

NEC.book  Page 20  Monday, May 10, 2004  2:46 PM