Справочник Пользователя для Unitech Electronics Co. Ltd. MS842RBBT
- 15 -
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS842RB User’s Manual
2.2 Cradle Mode
In order to establish a proper connection between your computer and a
scanner through a cradle, we suggest that you follow these step-by-step
instructions:
1. Switch the power button to the on position.
1. Switch the power button to the on position.
2. Plug the power supply cable into the MS842RB cradle and into an
electrical outlet. Plug the interface cable into the MS842RB cradle. You
must also connect it to the USB, RS232 port on your computer.
must also connect it to the USB, RS232 port on your computer.
3. Scan here to begin pairing the MS842RB using the cradle.
Cradle Mode
4. Scan the barcode label that appears under the cradle. The scanner will
beep one time and the LED light will blink to indicate the pairing process
has been successful. Your device is now ready to use.
has been successful. Your device is now ready to use.