Справочник Пользователя для Unitech Electronics Co. Ltd. MS842RBBT
- 48 -
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS842RB User’s Manual
3.3.24 NEC 2 of 5
NEC 2 of 5 On*
Default All NEC 2 of 5
Settings
NEC 2 of 5 Off
3.3.24.1 Check digit
No Check Digit indicates that the scanner reads and transmits bar code
data with or without a check digit. When Check Digit is set to Validate, but
Don’t Transmit, the unit only reads NEC 2 of 5 bar codes printed with a
check digit, but will not transmit the check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads
NEC 2 of 5 bar codes printed with a check digit, and will transmit this digit
at the end of the scanned data. Default = No Check Digit.
No Check Digit*