Справочник Пользователя для Unitech Electronics Co. Ltd. MS916BT
- 28 -
Set Default Parameter
The MS916 can be reset to two types of defaults: factory defaults or custom
defaults. Scan the appropriate bar code below to reset the MS916 to its default
settings and/or set the scan engine’s current settings as the custom default.
•
Restore Defaults - Scan this bar code to reset all default parameters
as follows.
•
If custom defaults were set by scanning Write to Custom
Defaults, scan Restore Defaults to retrieve and restore the
scan engine’s custom default settings.
•
If no custom defaults were set, scan Restore Defaults to restore
the factory default values listed in Table 3-1 on page 26.
•
Set Factory Defaults - Scan this bar code to restore the factory
default values listed in Table 3-1 on page 26. If custom defaults were
set, they are eliminated.
•
Write to Custom Defaults - Scan this bar code to store the current
scan engine settings as custom defaults. Once custom default
settings are stored, they can be recovered at any time by scanning
Restore Defaults.