Справочник Пользователя для Agfa Gevaert N V 5364A
216
2900H EN 20071108
Troubleshooting
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
4
Press the Confirm key again to resume printing using a limited Maximum
Density.
Density.
Identification code error for upper/lower input tray
This identification code error appears in the following cases:
•
you insert a new film pack with a encryption error in the Film
Identification tag,
Identification tag,
•
you have loaded a Mammo film pack or a Mammo film, whereas the
Mammo license is not activated.
Call your local service organization to resolve this problem. You can unlock
the tray to insert another film pack.
the tray to insert another film pack.
Identical identification code detected in upper/lower input tray
In case you have loaded a film pack with a non-unique Film Identification tag
(meaning that the current tag has been used with a previous film pack), the
following message is displayed:
(meaning that the current tag has been used with a previous film pack), the
following message is displayed:
Proceed as follows:
If the “Overrule RF-tag Reading” Setting is not activated, the following message will
be displayed:
be displayed:
In this case, press the Confirm key to initiate the loading procedure again or call
your local service organization to enable the “Overrule RF-tag Reading” Setting.
your local service organization to enable the “Overrule RF-tag Reading” Setting.