Справочник Пользователя для Honeywell International Inc. CTU-K05
Jumpers
Page 13
Jumpers
For normal operation, configure the jumpers on the main board as specified
in Table 2.
in Table 2.
Jumper
Function
Default state
P10
auxiliary tamper
Inserted
P12
auto-update of
firmware
firmware
Open
JP3
Ethernet full duplex
Open
JP4
Ethernet loopback
Inserted
Table 1: Configuration of jumpers on main board
Configure the jumpers on the display board as specified in Table 2.
Jumper
Function
Default state
JP2
data transmission
inserted between pins 1
and 2
and 2
JP3
data receipt
inserted between pins 1
and 2
and 2
Table 2: Configuration of jumpers on display board