Справочник Пользователя для Zebra Technologies Corporation P430I-MIFARE
26
P430i User’s Manual
980470-001 Rev. A
Printing a Card
Printing a Sample Card
“Single Feed Options” allows Disabling or Enabling Single Feed Support.
• If “Disable Single Feed Support” is selected, when the P430i Card Printer runs out of cards in the
feeder, the LCD display will read OUT OF CARDS. To continue, press the panel button.
• If “Enable Single Feed Support” is selected, when the P430i Card Printer runs out of cards in the feeder
it will wait until a card is inserted in the single-card slot or cards are loaded in the feeder, and then will
automatically continue.
automatically continue.
Printing a Sample Card
Sample card designs are installed with the printer driver. Sample cards require Microsoft Word or Microsoft P
aint application software. The cards are accessed via the Start menu. Select Start, select Programs, select Zebra
Card Printers, and select a sample card, or follow the directions below to design a card.
aint application software. The cards are accessed via the Start menu. Select Start, select Programs, select Zebra
Card Printers, and select a sample card, or follow the directions below to design a card.
Follow these steps to design and print your first card:
1.
Launch Microsoft Word Software. Depending on your computer configuration this may be done by
double-clicking an icon on your desktop, or by clicking the Windows Start icon, selecting Programs, and
navigating to Microsoft Word
double-clicking an icon on your desktop, or by clicking the Windows Start icon, selecting Programs, and
navigating to Microsoft Word
2.
Go to the File menu and choose Page Setup.
3.
Select the Paper Size tab, choose Card. Under orientation, select Landscape.
4.
Select the Margins tab, and set the Top, Bottom, Left, and Right margins to 0 (zero).
5.
Click OK to close the Page Setup window.
6.
The card appears on the screen.
7.
Design a card with both black and colored text and with colored pictures (see example below).
8.
Once you are ready to print, go to the File menu and select Print.
9.
If the printer was not selected as the default printer, go to the File menu, select Print Setup and choose
Zebra P430i Card Printer from the printer names list. Then Close the Print Setup dialog box.
Zebra P430i Card Printer from the printer names list. Then Close the Print Setup dialog box.
Note •
For cards thinner than 20 mils (0.51 mm) or thicker than 40 mils (1.02 mm), the card
design must be limited to (1) no more than two 30 mm x 30 mm areas of full color, (2) black
information (text and barcode, for example) must cover no more than 50% of the card area,
and (3) there must be at least a 5mm unprinted border along all edges.
For cards with thickness between 20 mils (0.51 mm) and 40 mils (1.02 mm), these
restrictions do not apply; full color printing is permitted edge to edge in both directions.
information (text and barcode, for example) must cover no more than 50% of the card area,
and (3) there must be at least a 5mm unprinted border along all edges.
For cards with thickness between 20 mils (0.51 mm) and 40 mils (1.02 mm), these
restrictions do not apply; full color printing is permitted edge to edge in both directions.
us!
http://www.zebracard.com