Справочник Пользователя для Integrated Microwave Technologies LLC. 25VST-AMP
25VST-AMP
User Manual
Revision 1.0
24
Figure 4-4: Booster Amplifier Connectios
4.6 Application Limitations
4.6.1 Shielding Integrity
When this device is integrated into a user configuration, care shall be taken to maintain Radio Frequency (RF)
shielding integrity. All RF paths shall employ coaxial cable and high-quality RF connectors. Integration
drawings and photographs shall be provided to IMT for review upon request. IMT retains responsibility for the
function of this device as designed and granted. Device integrators assume responsibility for ensuring that the
installed environment is equivalent to the reference design environment, and for maintaining RF performance
integrity as related to integration and installation.
The antenna for this device shall be installed with a separation of not less than 20cm from other antennas in
the installed environment. This recommendation is for system-to-system isolation. More separation might be
necessary, depending on the characteristics of other systems present.
shielding integrity. All RF paths shall employ coaxial cable and high-quality RF connectors. Integration
drawings and photographs shall be provided to IMT for review upon request. IMT retains responsibility for the
function of this device as designed and granted. Device integrators assume responsibility for ensuring that the
installed environment is equivalent to the reference design environment, and for maintaining RF performance
integrity as related to integration and installation.
The antenna for this device shall be installed with a separation of not less than 20cm from other antennas in
the installed environment. This recommendation is for system-to-system isolation. More separation might be
necessary, depending on the characteristics of other systems present.
4.6.2 RF Power Measurement
Upon completion of integration, and prior to commencing transmitter operation, an RF output power
measurement shall be made to ensure that the output power does not exceed 5W.
measurement shall be made to ensure that the output power does not exceed 5W.
4.6.3 FCC RF Exposure Requirements
This device is intended for application as a mobile radio transmitter, and it produces RF energy when
transmitting. The Federal Communications Commission (FCC) requires that RF Exposure to personnel be
transmitting. The Federal Communications Commission (FCC) requires that RF Exposure to personnel be
Power Input
Audio Input
Video Input
RF Output