Справочник Пользователя для ZyXEL Communications Corporation P873HNUP51B
Chapter 7 Wireless
P-873HNUP-51B User’s Guide
89
Click Network Settings > Wireless to open the General screen.
Figure 22 Network Settings > Wireless > General
The following table describes the general wireless LAN labels in this screen.
Table 11 Network Settings > Wireless > General
LABEL
DESCRIPTION
Wireless Network Setup
Wireless
You can Enable or Disable the wireless LAN in this field.
Channel
Set the channel depending on your particular region.
Select a channel or use Auto to have the ZyXEL Device automatically determine a
channel to use. If you are having problems with wireless interference, changing the
channel may help. Try to use a channel that is as many channels away from any
channels used by neighboring APs as possible. The channel number which the
ZyXEL Device is currently using then displays next to this field.
channel to use. If you are having problems with wireless interference, changing the
channel may help. Try to use a channel that is as many channels away from any
channels used by neighboring APs as possible. The channel number which the
ZyXEL Device is currently using then displays next to this field.
more.../less
Click more... to show more information. Click less to hide them.
Bandwidth
Select whether the ZyXEL Device uses a wireless channel width of 20MHz or
20MHz/40MHz.
20MHz/40MHz.
A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a
40MHz channel uses two standard channels and offers speeds of up to 300 Mbps.
40MHz channel uses two standard channels and offers speeds of up to 300 Mbps.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to
increase throughput. The wireless clients must also support 40 MHz. It is often
better to use the 20 MHz setting in a location where the environment hinders the
wireless signal.
increase throughput. The wireless clients must also support 40 MHz. It is often
better to use the 20 MHz setting in a location where the environment hinders the
wireless signal.
Select 20MHz if you want to lessen radio interference with other wireless devices in
your neighborhood or the wireless clients do not support channel bonding.
your neighborhood or the wireless clients do not support channel bonding.
Select 20MHz/40MHz to allow the ZyXEL Device to adjust the channel bandwidth
depending on network conditions.
depending on network conditions.