Справочник Пользователя для ZyXEL Communications Corporation V630
Chapter 11 WLAN Profile
V630 User’s Guide
123
Key Index
Select a default WEP key to use for data encryption. The key displays in the adjacent
field.
field.
Encryption Key Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey) for ASCII key type.
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey12345678) for ASCII key type.
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the same
on all wireless devices in the same wireless LAN. ASCII WEP
keys are case sensitive.
keys are case sensitive.
User Name
When using WPA or WPA2, enter your user name here.
Password
When using WPA or WPA2, enter your password here.
EAP Type
When using WPA-EAP or WPA2-EAP, select the type of EAP authentication that the
wireless network uses (or select Auto).
wireless network uses (or select Auto).
IP Setting
Select DHCP if you do not have a fixed IP address to use.
Select Static if you were given a fixed IP address information to use. Then fill in the
IP Address, Subnet Mask, Default Gateway and DNS fields.
Select PPPoE if the V630 needs to use a PPPoE account. You will also need a
PPPoE user name and password to use this.
Select Static if you were given a fixed IP address information to use. Then fill in the
IP Address, Subnet Mask, Default Gateway and DNS fields.
Select PPPoE if the V630 needs to use a PPPoE account. You will also need a
PPPoE user name and password to use this.
IP Address
If you set the IP Setting to Static, enter the V630’s IP address here.
Subnet Mask
If you set the IP Setting to Static, enter the V630’s subnet mask here.
Default
Gateway
Gateway
If you set the IP Setting to Static, enter the IP address of the default gateway here.
The default gateway is the device on the network that your V630 uses to access
other networks (like the Internet).
The default gateway is the device on the network that your V630 uses to access
other networks (like the Internet).
DNS
If you set the IP Setting to Static, enter the DNS (Domain Name System) server
your V630 uses here.
your V630 uses here.
PPPoE
Username
If you set the IP Setting to PPPoE, enter the user name for the PPPoE account
here.
here.
Password
If you set the IP Setting to PPPoE, enter the password for the PPPoE account here.
SIP Profile
Select the profile of SIP settings to use with this WLAN profile.
Apply
Click Apply to save your changes back to the V630.
Delete
Click Delete to remove the profile.
Reset
Click Reset to return the screen to the most recently saved settings.
Table 100 WLAN
LABEL
DESCRIPTION