Справочник Пользователя для ZyXEL Communications Corporation WAP6906

 Chapter 9 AP Connection

WAP6906 User’s Guide

This chapter discusses how to establish a wireless connection between your WAP6906 and another AP or 
wireless network. It allows you to connect to and/or extend the existing wireless network. 

Use these screens to choose an access point that you want the WAP6906 to connect to. You should 
know the security settings of the target AP.

• Use the Station screen to enable WiFi, enter the SSID and configure the wireless security between the 

WAP6906 and an existing wireless network (

).

• Use the AP List screen to scan the wireless networks in the WAP6906’s area (

). 

You can also select an AP from the list and enter its WiFi password to connect the wireless network.

• Use the WPS screen to quickly set up a wireless network with strong security between your WAP6906 

and the AP, without having to configure security settings manually (

).

Use this screen to manually enter the SSID and security settings of the AP to which you want the 
WAP6906 to connect. This screen allows you to set a profile so that the WAP6906 will automatically try to 
connect to the AP specified in the profile each time the WAP6906 is turned on.

Click Networking > AP Connection > Station to open this screen.

Figure 29   Networking > AP Connection > Station