Справочник Пользователя для COOPER INDUSTRIES INC FH1847N

T245 Control System Manual

16

The transmitter is equipped with a tilt sensor which automatically engages the

EMERGENCY STOP if the transmitter is tipped more than 90° from its normal
horizontal operating position.  This is a failsafe mechanism that protects the operator in
case he or she falls or is struck by the machine itself.  To resume operation from a tilt
condition, press and release the EMERGENCY STOP button after righting the
transmitter.

The 

 (battery) light is the “low battery” indicator.  When the battery voltage

is acceptable, the lamp will be off.  If the voltage becomes too low, the lamp will begin to
blink and the battery should be recharged, or replaced, as soon as possible.  The control
system will not become erratic with a low battery; it will simply cease to operate when
the voltage falls below the minimum operating level.

The Transmitter is powered by a Makita

®

 9.6V rechargeable power tool battery. A

Makita

®

 charger is available for purchase from OMNEX.  Call 1-800-663-8806 to order.

To charge the battery please follow the instructions included with the charger.  To

remove the battery from the transmitter, grasp the lip on the battery door and pull it down
and out to open the door.  Tilt the case to allow the battery to slide out.  The battery is
keyed to prevent incorrect installation (see Figure 6 below).

Figure 6  Battery Replacement