Справочник Пользователя для Creative Labs AVPSB1660
Setting Up Your Audio Device
Step 1: Charging Your Sound Blaster Free
Sound Blaster Free comes with a built-in rechargeable battery that provides up to 10 hours of playtime
when fully charged. Charge the speaker for at least 8 hours before its first use by connecting it to a
USB port on your computer. Each subsequent charge cycle takes around 3 to 4 hours.
when fully charged. Charge the speaker for at least 8 hours before its first use by connecting it to a
USB port on your computer. Each subsequent charge cycle takes around 3 to 4 hours.
Power Saving Mode
The speaker automatically powers down after 15 minutes of inactivity. When it is connected to a
computer, it automatically powers down when the computer shuts down or enters hibernation.
computer, it automatically powers down when the computer shuts down or enters hibernation.
Note:
Lithium polymer battery life may suffer when it is constantly fully depleted or overexerted at low
voltage. It is a good practice to keep the battery well charged.
voltage. It is a good practice to keep the battery well charged.
Step 2: Turning On Sound Blaster Free
Tap on the Power icon to turn Sound Blaster Free on. Tap again to power it off.
Note:
If the speaker has not been paired with any devices previously, it will go into Bluetooth discoverable
mode. Otherwise, it will be automatically paired to previously paired devices.
mode. Otherwise, it will be automatically paired to previously paired devices.
Setting Up Your Audio Device 6