Справочник Пользователя для Motorola Mobility LLC T56CP1

MOTOROLA INC       

 

 

 

 

 

FCC ID: IHDT56CP1 

 

 
 
 

1.  GENERAL:  
 
 

The In-Cabin Bluetooth Module facilitates a wireless Bluetooth interface between 

an in- vehicle control unit and other Bluetooth-enabled devices (such as a laptop PC, a 
handset, etc.).  
 
 
2.  ANTENNA AND MODULE INSTALLATION: 
 

The module utilizes an internal, pc board mounted, chip antenna.  The unit is 

designed for installation within the passenger compartment of an automobile, usually in 
the center console area.  The device should be mounted with a plastic bracket to minimize 
shadowing of the internal antenna.  Due to the low power at which the unit transmits 
(0.0025 W max.), placement from an SAR perspective is not critical.   
 

All module installations are performed by the vehicle manufacturer.  No end-user 

installation is involved.  Any unauthorized changes or modifications not expressly 
approved by Motorola could void the user’s authority to operate this equipment.   
 
 
3.  I/O CONNECTION: 
 
 

A cable mounted 20-pin female automotive connector is utilized to provide power 

and vehicle bus communications.  This connector will only mate with a corresponding 
connector in the vehicle’s prewire. 
 
 
4.  SPECIFICATIONS: 
 

??

Frequency range:   

2402 MHz – 2480 MHz 

 

??

Operating current:  

1.5A nominal 

 

??

Operating voltage:  

13.2V nominal 

 

 

??

Operating temp. range: 

-30

?

C to +70

?

C 

 

??

Storage temp. range: 

-40

?

C to +85

?

C 

 

??

Output power: 

 

0.0025 W max