Справочник Пользователя для National Datacomm Corporation 0610S02
20
Instant
Wave High Speed
PCI/PC Card
There are more than one wireless adapter entries shown in the Control
Panel/Network folder. You do not know which one is the current one
Panel/Network folder. You do not know which one is the current one
•
A previously installed wireless adapter entry for a different card was not
removed
removed
1. Remove all wireless LAN adapter entries from the Network
window
2. Reboot the PC to re-install the wireless adapter
Windows NT 4.0
Installation Problems
Windows NT 4.0 could not find the adapter
•
The adapter is not properly inserted in the slot
1. Power off the computer
2. Remove and reinsert the wireless adapter
3. Reboot the computer and re-install the adapter driver
2. Remove and reinsert the wireless adapter
3. Reboot the computer and re-install the adapter driver
•
A previous adapter installation was aborted by the user, or by Windows NT
4.0
4.0
1. Look in Control Panel/Network/Adapters
2. If an InstantWave adapter entry exists, remove it from the
2. If an InstantWave adapter entry exists, remove it from the
list and exit the Control Panel/Network dialog box
3. Reboot the computer and re-install the adapter driver
The InstantWave adapter driver cannot be started and the adapter LEDs are not
flashing
flashing
•
More than one driver is present in the Network setup folder
1.
Click Control Panel/Network/Adapters
2. If there is more than one entry for the same InstantWave
adapter, remove them all
3. Reboot Windows NT
4.
Reinstall the InstantWave adapter driver