Справочник Пользователя для National Datacomm Corporation 0610S11
InstantWave PCI/PC Card
15
step8. Click OK. The InstantWave PCI Adapter Setup dialog box will open
(Figure 23). Select the Network Type and Carrier Set. If the station is
connected to an Access Point, Infrastructure mode must be specified.
Select Ad Hoc mode to make a peer to peer connection to other wireless
stations. If the country of operation is different from the country in
which the product was purchased, the user can change the carrier set.
All wireless stations and Access Points must use the same Carrier Set in
order to communicate. The Domain name should be the same as the
network domain to which the station will be connected
connected to an Access Point, Infrastructure mode must be specified.
Select Ad Hoc mode to make a peer to peer connection to other wireless
stations. If the country of operation is different from the country in
which the product was purchased, the user can change the carrier set.
All wireless stations and Access Points must use the same Carrier Set in
order to communicate. The Domain name should be the same as the
network domain to which the station will be connected
Figure 23. Select the Network Type and Carrier Set
step9. Click OK. The Roaming dialog box will open (Figure 24)
Figure 24. Set Roaming Switch
step10. When Roaming is enabled, the station is allowed to roam to another
Access Point under the same Domain Name whenever the radio signal
quality of the currently connected AP is below an acceptable level.
Click OK. The Security dialog box will appear (Figure 25)
quality of the currently connected AP is below an acceptable level.
Click OK. The Security dialog box will appear (Figure 25)
Figure 25. Set Security