Справочник Пользователя для National Datacomm Corporation 1022S01

 

 10 

Microsoft Windows XP: 

1.  Turn on the computer. Windows XP will detect the adapter and start the Found New 

Hardware Wizard. 

2.  Insert the Wireless Adapter Driver disk and select “Install from a list or specific location 

(Advanced)”; then choose 

. 

3.  Check “Include this location in the search” and type the following into the location box: 

a:\winxp 

4. Choose 

. Installation will begin. 

5.  When the Found New Hardware Wizard indicates that installation is complete, choose 

. 

After the driver is installed, an icon of a CardBus adapter will appear in the “system tray” or 
“notification area” of the task bar. The following illustration is from Microsoft Windows 98; the 
corresponding portion of your screen may look quite different: 

 

 

The driver normally works automatically: 

• 

When the computer is turned on with the adapter inserted, the driver is loaded and its 

icon appears in the “system tray” (also called the “notification area”). 

• 

When the computer is turned on with the adapter removed, the driver is not loaded and its 

icon does not appear. 

You can also control the driver and the adapter as follows: 

• 

To deactivate the driver:   Click the driver’s icon using the mouse’s main button 

(usually the left button) and choose 

. 

 

 

This will unload the driver from the computer’s memory and turn off power to the 
adapter. The message “You may safely remove this device” will appear; choose 

 to 

continue.