Справочник Пользователя для Garmin International Inc 01113
viii
Tracking System Owner’s Manual - Draft
I
ntroductIon
>
Caring for the Tracking System
The cases are constructed of high-quality materials
and does not require user maintenance except
cleaning.
and does not require user maintenance except
cleaning.
Cleaning the Cases
Clean both unit’s outer casing (except for the
receiver’s screen) using a cloth dampened with a mild
detergent solution and then wipe dry. Avoid chemical
cleaners and solvents that may damage plastic
components.
receiver’s screen) using a cloth dampened with a mild
detergent solution and then wipe dry. Avoid chemical
cleaners and solvents that may damage plastic
components.
Cleaning the Screen
Clean the Receiver’s screen using a soft, clean, lint-
free cloth. Use water, isopropyl alcohol, or eyeglass
cleaner if needed. If these are used, apply the liquid
to the cloth, and then gently wipe the screen with the
moistened cloth.
free cloth. Use water, isopropyl alcohol, or eyeglass
cleaner if needed. If these are used, apply the liquid
to the cloth, and then gently wipe the screen with the
moistened cloth.
Storage
Do not store the Tracking System where prolonged
exposure to temperature extremes may occur (such as
in the trunk of a car) as permanent damage may result.
User information, such as waypoints and routes, are
retained in the unit’s memory without the need for
external power. It is always a good practice to back
up important user data by manually recording it or
downloading it to a PC (transferring it to MapSource
software).
exposure to temperature extremes may occur (such as
in the trunk of a car) as permanent damage may result.
User information, such as waypoints and routes, are
retained in the unit’s memory without the need for
external power. It is always a good practice to back
up important user data by manually recording it or
downloading it to a PC (transferring it to MapSource
software).
Water Immersion
The Tracking System
is waterproof to IEC Standard
60529 IPX7. It can withstand immersion in 1 meter
of water for 30 minutes. Prolonged submersion can
cause damage to the unit. After submersion, be certain
to wipe and air dry the unit before reuse or charging.
of water for 30 minutes. Prolonged submersion can
cause damage to the unit. After submersion, be certain
to wipe and air dry the unit before reuse or charging.
Tracking System Owner's Manual F8 8
1/16/2007 1:51:38 PM