Справочник Пользователя для Garmin International Inc 01792
Forerunner 610 Owner’s Manual
29
Navigation
Navigating to a Saved
Location
Before you can navigate to a saved
location, you must locate satellite
signals.
1. Select > Where To? >
1. Select > Where To? >
Locations.
2. Select a location.
3. Select Go to Location.
3. Select Go to Location.
The compass page appears.
To record the activity, you must start
the timer.
Navigating Back to Start
You can only navigate to your starting
location, if you are training with GPS.
At any point during your run, you
At any point during your run, you
can return to your starting point. You
must start the timer in order to use this
feature.
1. During your run, select STOP, but
do not reset the timer.
2. Select > Where To? > Back to
Start > Go.
The Forerunner navigates you back
The Forerunner navigates you back
to the starting point your run.
Stopping the Navigation
Select > Where To? > Stop
Navigation.
gPS Settings
Turning Off gPS
Select > Where To? > GPS >
GPS > Off.
When GPS is off, speed and distance
data are not available unless you have
an optional sensor that sends speed and
distance data to the device (such as the
foot pod or GSC 10). The next time
you turn on the device, it will search
for satellite signals again.