Справочник Пользователя для Garmin International Inc 01997

Pull the collar strap out of the VHF

antenna guide and the dog device.
You may need to push and pull the

collar strap to properly move it through

all of the loops in the case.

Thread the new collar strap through

the dog device and VHF antenna

guide.

Place the collar strap in between the

two sides of the GPS antenna.

Replace the four screws that secure

the GPS antenna case.

Before you replace the VHF antenna in

the collar, you need a small Phillips

screwdriver.

Remove the 4 screws 



 from the L-

shaped cover over the VHF antenna.

Pry off the L-shaped cover.

Remove the screw 



securing the

VHF antenna to the back plate.

Pull the length of the antenna from the

antenna guide to remove the old

antenna.

Loop the antenna guide around the

collar strap, and thread the new VHF

antenna through the guide.
This helps to point the antenna up.

Replace the screw securing the VHF

antenna to the back plate.

Replace the L-shaped cover over the

VHF antenna.

Replace the 4 screws on the L-shaped

cover.

Appendix

53

DRAFT