Справочник Пользователя для Garmin International Inc 02120D

SiriusXM radio channels are grouped in categories. You can

select the category of channels that appear in the channel

guide.

Select Media > Menu > Category.

Select a category.

The SiriusXM presets list is a customizable channel category.

You can save your favorite channels to the presets list.

Select Media > Menu > Source.

Complete an action:
• To select a specific channel, select a

SiriusXMchannel, and select Back.

• To enter an channel manually, select Channel Entry,

enter a channel number, and select Select.

Select Save Preset.

Select Media > Menu.

Select an option:
• To turn the SiriusXM satellite radio volume off or on,

select Volume.

• To adjust the volume level, use the slider bar.

You can quickly change the SiriusXM channel or adjust the

volume while viewing a chart or while viewing gauges.

From any chart or from the gauges screen, select

SiriusXM.

Adjust the SiriusXM channel or adjust the volume.

Select Back to return to the chart or gauges.

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter

by pressing  .

Select Settings > System > Auto Power.
NOTE: When Auto Power is On, and the chartplotter is

turned off using  , and power is removed and reapplied

within less than two minutes, you may need to press   to

restart the chartplotter.

Select Settings > System.
Display: Adjusts the backlight brightness and color scheme.
Beeper: Turns on and off the tone that sounds for alarms and

selections.

Auto Power: Turns the device on automatically when power

is applied (page 26).

Keyboard Layout: Sets the arrangement of the keyboard to

an alphabetical or computer keyboard layout.

Language: Sets the on-screen text language.

Speed Sources: Selects the source of the speed data used

to calculate true wind speed or fuel economy. Water

speed is the speed reading from a water-speed sensor,

and GPS speed is calculated from your GPS position.

System Information: Provides information about the devices

on the network and the software version.

Simulator: Turns the simulator on or off and allows you to

set the time, date, speed, and simulated location.

GPS: Provides information about the GPS satellite settings

and fix (page 26).

Select Settings > System > GPS.
Skyview: Shows the relative position of GPS satellites in the

sky.

GLONASS: Turns on or off GLONASS usage (Russia

satellite system). When the system is used in situations

with poor sky visibility, this configuration can be used in

combination with GPS to provide more accurate position

information.

WAAS/EGNOS: Turns on or off WAAS (in North America) or

EGNOS (in Europe), which can provide more-accurate

GPS position information. When using WAAS or EGNOS,

the device may take longer to acquire satellites.

Speed Filter: Averages the speed of your vessel over a short

period of time for smoother speed values.

Initialize Position: Initializes the GPS receiver and begins

collecting new almanac data from the satellites.

The event log shows a list of system events.

Select Settings > System > System Information >

Event Log.

You can view the software version, the basemap version, any

supplemental map information (if applicable), the software

version for an optional Garmin radar (if applicable), and the

unit ID number. You may need this information to update the

system software or to purchase additional map data

information.

Select Settings > System > System Information >

Software Information.

NOTE: Some settings and options require additional charts

or hardware.
Select Settings > My Vessel.
Keel Offset: Offsets the surface reading for the depth of a

keel, making it possible to measure depth from the

bottom of the keel instead of from the transducer location

(page 15).

Temperature Offset: Compensates for the water

temperature reading from a NMEA 0183 water-

temperature sensor or a temperature-capable transducer

(page 27).

Calibrate Water Speed: Calibrates the speed-sensing

transducer or sensor (page 27).

Fuel Capacity: Sets the combined fuel capacity of all the fuel

tanks on your boat (page 13).

Fill Up All Tanks: Sets the tank levels to full (page 13).

26

Device Configuration

DRAFT