Справочник Пользователя для Charles Machine Works Inc The 752TKR0408

1.

Place 86BG beacon into the housing and put the lid on the 
housing.

2.

Use the Smart tool according to the instructions included with 
the level.

3.

Use the Smart tool to level the housing to 0. 

4.

Using the tracker, check the pitch of the 86BG and make sure 
that it is ± 1% or lower. If the pitch is more than ± 1%, remove 
housing lid and adjust the beacon inside the housing to ± 1% 
or less and repeat steps 3 and 4. 

IMPORTANT: If the 86GB is not within ± 1% of zero, the 
tracker pitch will not calibrate.

5.

Once the housing is level and the 86BG is within ± 1%, push 
and hold the F/A/L/R button and press the down arrow key. 
This will reset the pitch shown on the tracker to zero.

6.

To revert to actual/pitch display, press and hold the F/A/L/R 
button and press the down arrow key, then press the up 
arrow key. This will reset the pitch display to show actual 
pitch rather than calibrated pitch.

1.

Place 86BG beacon into the housing and put the lid on the 
housing.

2.

Use the Smart tool according to the instructions included with 
the level.

3.

Use the Smart tool to level the housing to 0. 

4.

Using the tracker, check the pitch of the 86BG and make sure 
that it is ± 1% or lower. If the pitch is more than ± 1%, remove 
housing lid and adjust the beacon inside the housing to ± 1% 
or less and repeat steps 3 and 4. 

IMPORTANT: If the 86GB is not within ± 1% of zero, the 
tracker pitch will not calibrate.

5.

Once the housing is level and the 86BG is within ± 1%, push 
and hold the F/A/L/R button and press the down arrow key. 
This will reset the pitch shown on the tracker to zero.

6.

To revert to actual/pitch display, press and hold the F/A/L/R 
button and press the down arrow key, then press the up 
arrow key. This will reset the pitch display to show actual 
pitch rather than calibrated pitch.