Справочник Пользователя для Charles Machine Works Inc The CMW-300ST
30
300SR/ST - OPERATION
LOCATE LINE: ACTIVE LOCATION
30
300SR/ST - OPERATION
LOCATE LINE: ACTIVE LOCATION
LOCATE LINE: ACTIVE LOCATION
Setup
Follow setup procedures for the type of locating you will be doing:
direct connection, induction clamp, or broadcast induction.
direct connection, induction clamp, or broadcast induction.
Direct Connection
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICE: Electric shock or equipment damage can result if
transmitter is connected to live cable. Contact qualified utility
personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
transmitter is connected to live cable. Contact qualified utility
personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
To set up transmitter for direct connection:
1.
Drive ground stake.
2.
Plug cable into transmitter.
3.
Hook black cable to ground stake.
4.
Hook clip to line.
5.
Turn on transmitter.
NOTICE: Turn off transmitter when connecting or moving ground
LOCATE LINE: ACTIVE LOCATION
Setup
Follow setup procedures for the type of locating you will be doing:
direct connection, induction clamp, or broadcast induction.
direct connection, induction clamp, or broadcast induction.
Direct Connection
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICE: Electric shock or equipment damage can result if
transmitter is connected to live cable. Contact qualified utility
personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
transmitter is connected to live cable. Contact qualified utility
personnel and follow all local standards and restrictions for
disconnecting and grounding lines.
To set up transmitter for direct connection:
1.
Drive ground stake.
2.
Plug cable into transmitter.
3.
Hook black cable to ground stake.
4.
Hook clip to line.
5.
Turn on transmitter.
NOTICE: Turn off transmitter when connecting or moving ground