Справочник Пользователя для Charles Machine Works Inc The CMW-R-75T
750 Tracker - CONTROLS
9
CONTROLS
750 Tracker - CONTROLS
9
CONTROLS
Depth + On/Off
Pressing these buttons when tracker is on cycles volume from low
to high to off. Pressing and holding depth button before turning
tracker on changes signal strength display. See “Signal Strength”
section later in this chapter for more information.
to high to off. Pressing and holding depth button before turning
tracker on changes signal strength display. See “Signal Strength”
section later in this chapter for more information.
Depth + Fore/Aft/Left/Right
Pressing these buttons switches LCD backlight off and on.
Depth + Up
Pressing these buttons enters tracker into calibration mode. See
OPERATION for further information.
OPERATION for further information.
Depth + Down
Pressing these buttons selects radio channel. “CH-1” or “CH-2” or
“OFF” will appear in display.
“OFF” will appear in display.
Depth + Mode
Pressing these buttons changes depth units from default setting
of feet:inches to inches, centimeters, or meters.
of feet:inches to inches, centimeters, or meters.
On + Up
Holding up button and pressing on button switches left/right
arrows off and on.
arrows off and on.
On + Down
Holding down button and pressing on button switches all
guidance arrows off and on. NOTE: If all arrows are disabled,
remote guidance will not work.
guidance arrows off and on. NOTE: If all arrows are disabled,
remote guidance will not work.