Справочник Пользователя для Panasonic Healthcare Co. Ltd. 9TB097DSS

LKM-A121-BC / LKM-A121-BD

Avoid placing the drive in a location subject to:
- high humidity
- high temperature
- mechanical shock and vibration
- direct sunlight

• Do not move the drive while it is operating.  It may cause malfunction.
• Avoid exposing the drive to sudden changes from a low to high in temperature.

This may cause water condensation to collect inside the drive. If the ambient
temperature changes suddenly in transit, wait for more than four hours before
turning on the drive.  If you attempt to operate the drive immediately after a sudden
increase in temperature, a malfunction may occur.

• Turning off the power to the drive while it is writing to tape may cause the tape to

become unreadable.  All previously negotiated parameters will be lost, whenever
power to the drive is cycled.

• Upon execution of the hardware reset hole, the driver will be reset and there is a

risk of lost and unreadable data. Thus, please do not use the hole other than repair
purposes.

• Keep the original packing materials to facilitate transportation of the drive.
• Always remove the tape before moving the drive.  After removing the drive from the

computer, repack the drive into its original packing.

• After removing the SFP Fibre Channel Module from the drive and put the cap to it,

repack them into its original packing.