Справочник Пользователя для Deister Electronic GmbH TPU4030
2. Mechanical Dimensions
All dimensions in mm [inch].
3. General Information
TPU 4030 is an active transponder, which was developed to be used in combination with
Amantag Compact and / or PRX5 reader or ADA (Amantag deactivator).
Amantag Compact and / or PRX5 reader or ADA (Amantag deactivator).
The transponder has three interfaces for communication with readers.
•
Receiving via 8,1 kHz
•
Sending via 433 MHz
•
Sending and receiving via125 kHz (passive modulation)
Amantag Compact readers are using 8.1 kHz and 433 MHz frequencies. These low-
frequency fields are generated by the reader and serve to activate the transponder and to
communicate with the transponder. Messages from the transponder to the reader are
transmitted via 433 MHz. Once a transponder is brought into the sphere of the low
frequecy field, it is activated and gets recorded by the reader. Reader and transponder will
remain in a constant communication with each other until the transponder leaves the field.
The transponder can also send out an acoustic signal when it is detected by the reader.
frequency fields are generated by the reader and serve to activate the transponder and to
communicate with the transponder. Messages from the transponder to the reader are
transmitted via 433 MHz. Once a transponder is brought into the sphere of the low
frequecy field, it is activated and gets recorded by the reader. Reader and transponder will
remain in a constant communication with each other until the transponder leaves the field.
The transponder can also send out an acoustic signal when it is detected by the reader.
An 125 kHz interface is used for data exchange with PRX 5 reader or ADA. After activation, the
transponder sends data to the reader for about 3 seconds. To activate the transponder again, it
must first be removed from the reader field and then brought in again.
transponder sends data to the reader for about 3 seconds. To activate the transponder again, it
must first be removed from the reader field and then brought in again.
6
m_en_tpu-4030-pcb_pro_v111115_de_bf