Справочник Пользователя для Sunrex Technology Corp 415C

 

 

 

 

 

 

Touch-pad cleaning 

 

If the product have Touch-pad device, when the cursor skip or move abnormally, 

        Clean the pad . 

 

 

Wireless Keyboard no function 

 

‧Make sure receiver dongle plug into correct port.    Receiver port should plug into     

            PC USB port. For the best efficiency, keep the receiver 8 inch or 20 cm distance 

with other electrical device. Ex. Computer, Monitor.. 

‧Make sure you set up the battery correctly. And make sure battery is full   

            charged. 

 

‧Set up the communication between receiver and keyboard. Press   

            the  button  on  the  receiver,  then  press  “ID  setting  button＂  on  the  keyboard  to 

adjust    the  frequency.  If  you  have  SUNREX  or  JME  wireless  keyboard  and 

setting    instruction.  Make  sure  you  have  press  the  “ID  setting  button＂  and 

“link button, the Fn and c key＂ on keyboard at the same time.         

        ‧Try to remove and link receiver and computer once again.