Справочник Пользователя для Image Sensing Systems Inc. RTMS-K4

™  User Manual for Model K4 

The RTMS shipment contains: 

•  The RTMS sensor with lynch pin. 
•  Ball-joint mounting bracket; the vertical style is shipped by default; a horizontal style is available on 

request. 

•  Connector kit consisting of :  

- 

MS connector, female crimp pins, backshell, and pin insertion/extraction tool 

- 

DB-9F connector, female crimp pins and backshell  

- 

RJ-45 jack, if ordered with internal TCP/IP option 

•  RTMS Setup Utility Software on CD. 
•  Antenna, if equipped with an internal DSS modem (indicated by a label). 

Please notify EIS Inc. immediately if the contents are incomplete or there is physical damage. 

 

The standard RTMS offers the following: 

•  K-band (24.125 GHz) radar signaling 
•  Low voltage power 12-24V AC or DC 
•  RS-232/485/USB Serial Interface 
•  Integrated 8MB of internal data storage for counting applications 

 

RTMS may be ordered with the following options: 

•  Secondary RS-232/485 Serial Interface   
•  Integrated Digital Spread Spectrum (DSS) transceiver  
•  Integrated CDMA or GPRS RF modem   
•  Integrated NTCIP 1209 Protocol Converter 
•  Integrated TCP/IP Ethernet Interface   
•  16-zone contact closures 
•  Integrated Video Camera 

• 115V 

AC 

For battery-operated systems RTMS the following may be activated on request:  

•  Power Management Option 

Allows operating the RTMS in programmable cycles, to conserve battery power.  The maximum 
standby period during, which RTMS draws negligible power, is 254 minutes i.e. 4 hours, 14 minutes.  

•  Low Voltage Disconnect Option 

Protects the battery against damaging deep discharge if the voltage falls below 11.5 V. 
Recommended in applications where the battery charging equipment does not offer such protection. 

Factory options are indicated by labels on the bottom of the unit. 

EIS Electronic Integrated Systems Inc.