Справочник Пользователя для Image Sensing Systems Inc. SX300AN

Chapter 5:

Zone Setup

RTMS Sx-300 User Guide

5-56

The following screen appears.

5. Select the zone number that needs to be adjusted.

6. Use the up and down arrow keys to select the zone boundary.

7. To change the boundary by a single micro-slice at a time, click Move Away or

Move Closer.

Observe the effect on detection accuracy with the blips on the detection map. The
boundary move affects the zones on either side, reducing one and enlarging the
other.

–

A counter shows the amount of shift at any time. This counter resets when
you select the next boundary.